- ALL TUBE RIAA PHONO/LINE STAGE PREAMPLIFIER
GET THAT OLD VINYL OUT - THIS IS EXACTLY WHAT YOU
NEED TO TRULY ENJOY IT FOREVER!
SIMPLY SUBURB - QUIET - CLEAN - DETAILED
HERE IS THE NEW VERSION OF OUR Elite4 STEREO
PREAMPLIFIER FEATURING AN MM RIAA MAGNETIC PHONO
STAGE, OUR LCC - LOUDNESS CONTOUR CONTROL, AND METICULOUSLY HAND WIRED
CONSTRUCTION ON A HIGH QUALITY CIRCUIT BOARD BUILT TO THE SAME
HIGH STANDARDS AS OUR Elite80 POWER AMP.
THIS PREAMP IS A PERFECT MATE FOR ANY OF OUR
Elite80, Elite80M or
POWER AMPLIFIERS, OR FOR ANY QUALITY POWER AMP FOR THAT MATTER - TUBE OR
SS. SEE THE PHOTOS WITH IT MATED TO AN Elite80 POWER AMP.
Design & Quality:
This Class A design preamplifier has been thoughtfully engineered and
carefully hand assembled with strict quality checks done throughout the
entire process. An engineering test report is filled out for every unit
during the burn-in period to ensure proper performance of every
individual component in the circuit. We WOULD NOT sell anyone a piece of
equipment that didn't perform to our high standards during listening
tests. Our name is on these and we want them to be right for decades.
You can see more Elite Series photos here:
Vacuum Tubes - Four 12AX7's with DC filaments
for dead quiet operation and an optional 6C4P-EV (6X4) B+ rectifier.
Some Elite4 versions may use 6N2P-EV, a very high quality, excellent
sounding near 12AX7 equivalent.
Controls - AC Power Switch, two Volume Controls, An LCC Control, a 3
position Selector Switch with Phono, CD, Tuner, and
optional Tape input positions.
more info about our unique Loudness Contour Control.
Connectors Power: IEC320 Inlet, Inputs and outputs: ground isolated
Neutrik gold plated RCA. A detachable IEC power cord is included.
Circuit Protection There are 3 internal circuit protection devices to
ensure safe operation.
Documentation This preamplifier comes with a comprehensive owners
Audio Level Output Greater than 5 Volts RMS per channel.
Frequency Response - 20Hz to 22KHz plus or minus 1.0dB.
Input Sensitivity - Mag Stage: 2.0-3.0 mV, Line stages: 100- 500 mV,
This RMS signal will provide full output.
Input Impedance Mag Stage: 47K Ohms, Line Stages: 100k Ohms.
Output Impedance Cathode Follower: 15k Ohms.
AC Power Requirements - comes wired for 120 Volts 50/60Hz and can be
configured for any international voltage.
Power Consumption 25 Watts.
Dimensions 12.0(305mm)Wide x 8.0(203mm)Deep x 7.75(197mm)High and
weighs 19 Lbs (8.6KG).
Transformers The high quality potted power transformer which meets
Ideal Innovation's specifications is 100% shielded to ensure ultra quiet
operation, and has been Hi-Pot tested at 1500 volts.
Chassis All custom made sheet metal finished in black textured powder
coat for maximum durability and good appearance. All labeling on the top
panel is silk screened.
Other Resistors are all metal film flameproof and rated at 1 watt or
more regardless of actual load and capacitors are all high quality for
long life and excellent performance. Level control potentiometers are
full size not those little cheapies that wear out after a while and
the selector is a rugged full size switch made by OAK in the USA. All
tube sockets are ceramic with good quality pin contacts.
All Canadian customers will have to pay GST or HST.
Warranty & Returns:
Warranty - The Elite4 Preamplifier comes with a LIFETIME GOOD
PERFORMANCE GUARANTEE. This warranty is subject to the terms and conditions of our
as posted on our website.
Returns See our Return
email us here
We are located in the EST time zone and will gladly provide more photos
or answer any questions about this Preamplifier and its applications.
Just let us know how we can help.
THANKS FOR LOOKING!!
Back To: Top of
Page or Home